11-01-2021, 05:39 PM
Currently R23 = 3.3kΩ, R24=470Ω and C23=100nF.
So I need to replace the resistors with new values, remove C23 totally and replace with a link, then put a new 10nF C23 in parallel with R24 ... so was just thinking of just putting it on top of R24, or underneath. When I looked at my other two Mainboards, they have specified TPs on the board.
So I need to replace the resistors with new values, remove C23 totally and replace with a link, then put a new 10nF C23 in parallel with R24 ... so was just thinking of just putting it on top of R24, or underneath. When I looked at my other two Mainboards, they have specified TPs on the board.