27-12-2020, 12:51 PM
This is the end result.
[1] Fixed my soldering issues: 7805 ground pin, MAX4619 pin 9, inductor L2 for green output signal
[2] Increased panel hole for DC power plug to 11.5mm so my inline power switch will fit
[3] Added switch for C128 Luma fix
[4] Added switch for H_SYNC invert for Amstrad CPC (and BBC Model B?)
[5] Added push button for auto-adjust in case I need to force a re-sync when switching computers
I'm very happy and really appreciate Ewan's help over the weekend.
Brett.
[1] Fixed my soldering issues: 7805 ground pin, MAX4619 pin 9, inductor L2 for green output signal
[2] Increased panel hole for DC power plug to 11.5mm so my inline power switch will fit
[3] Added switch for C128 Luma fix
[4] Added switch for H_SYNC invert for Amstrad CPC (and BBC Model B?)
[5] Added push button for auto-adjust in case I need to force a re-sync when switching computers
I'm very happy and really appreciate Ewan's help over the weekend.
Brett.