11-07-2020, 09:50 AM
Hi Anders and welcome to the forum 
I've seen these 2 on Tradera and have watched as the price has fallen over the past months, postage to Australia was exorbitant unfortunately so glad you have picked them up Nice pictures by the way
The case did go through a few minor variations and the miss-match may have occurred normally, I have seen that before but suspect the bottom part of the case is from an older Microbee. The Model II on the bottom is on EVERY Microbee case, that bit was never changed even right up to the last Premium models. Can you take the top off the 'bee and take a picture as that will tell us exactly what model you have, I suspect its a standard 128k Microbee
The Floppy drive case was the first of that kind. Very heavy as power supply was built around transformers and some large capacitors, which may need replacing. Check before powering it up. Later models had switch mode power supplies.
We have everything you need in the Repository regarding software and documentation, just go here https://microbeetechnology.com.au/forum/...php?tid=15 . Any problems just ask
I've seen these 2 on Tradera and have watched as the price has fallen over the past months, postage to Australia was exorbitant unfortunately so glad you have picked them up
Nice pictures by the way The case did go through a few minor variations and the miss-match may have occurred normally, I have seen that before but suspect the bottom part of the case is from an older Microbee. The Model II on the bottom is on EVERY Microbee case, that bit was never changed even right up to the last Premium models. Can you take the top off the 'bee and take a picture as that will tell us exactly what model you have, I suspect its a standard 128k Microbee
The Floppy drive case was the first of that kind. Very heavy as power supply was built around transformers and some large capacitors, which may need replacing. Check before powering it up. Later models had switch mode power supplies.
We have everything you need in the Repository regarding software and documentation, just go here https://microbeetechnology.com.au/forum/...php?tid=15 . Any problems just ask
---------------------------
ChickenMan
ChickenMan