Fitting a Gotek Floppy Emulator to your Microbee Procedure

[ChickenMan]

I've updated the procedure yet again.  With the latest FlashFloppy firmware, currently version 2.14, there is no need to add the AUTOBOOT.HFE file to the USB Flash drive, just add your *.DSK files.  I've also included the fitting of a Rotary Encoder that makes life so much easier changing the image you wish to boot rather than use the 2 buttons.  I have done this now to all my Gotek's.

So, the updated version was placed in the MbeeTech repository in the Microbee\Documentation\Articles\Technical folder 

gotek_drive_on_the_microbee.pdf