07-10-2025, 10:56 PM
From the Microbee 1976 tech manual
NOT DGOS compatible. Outputs the character in the
C register to the 80 x 24 video driver routine, which
emulates an ADM-3A/TVI912C. The following control
codes are implemented:
bell (07)
backspace (08)
tab (09)
LF (OA)
cursor up (0B)
cursor right (OC)
CR (OD)
clear and home (1A)
home cursor (1E)
The following escape sequences are also supported:
ESC )
ESC
ESC = <x> <y>
ESC e
ESC E
ESC r
ESC R
ESC t
ESC T
ESC y
ESC Y
ESC f - ESC DEL
set half intensity
set full intensity
cursor to line y,
col x, with offset
of 20h
insert line
11 11
remove line O
clear line
clear to EOS
It
space
NOT DGOS compatible. Outputs the character in the
C register to the 80 x 24 video driver routine, which
emulates an ADM-3A/TVI912C. The following control
codes are implemented:
bell (07)
backspace (08)
tab (09)
LF (OA)
cursor up (0B)
cursor right (OC)
CR (OD)
clear and home (1A)
home cursor (1E)
The following escape sequences are also supported:
ESC )
ESC
ESC = <x> <y>
ESC e
ESC E
ESC r
ESC R
ESC t
ESC T
ESC y
ESC Y
ESC f - ESC DEL
set half intensity
set full intensity
cursor to line y,
col x, with offset
of 20h
insert line
11 11
remove line O
clear line
clear to EOS
It
space