+- Discussion Forum for all things Microbee (https://microbeetechnology.com.au/forum)
+-- Forum: Microbee Forum (https://microbeetechnology.com.au/forum/forum-1.html)
+--- Forum: Repository Additions (https://microbeetechnology.com.au/forum/forum-3.html)
+--- Thread: BeeMON Super Monitor Instruction Manual for the Microbee (/thread-864.html)
BeeMON Super Monitor Instruction Manual for the Microbee - ChickenMan - 22-11-2024
Thanks to kimjohn for making this manual available to be scanned. Scanned at 300pdi and then converted to a searchable PDF as usual. A4 in size and 7 pages long.
This monitor is completely self contained, it can be used with or without
the EDASM# or WORD-BEE# on a MICROBEE# computer.
The BeeMON EPROM is to be placed into the NETWORK ROM location.
CAUTION !!! The BeeMON EPROM should be orientated in the same direction as
the other EPROMS.
Access to the BeeMON (COLD START) is by USR(57344) from BASIC or by G E000
from EDASM/MONITOR# or WORD-BEE/MONITOR#.
WARM START to BeeMON is by USR(57347) or by G E003.
LIST OF COMMANDS
MEMORY COMMANDS Compare, Dump, Enter, Fill, Go, Move, Search.
INPUT AND OUTPUT COMMANDS -- Set input/output to and from keyboard, video,
parallel/serial port, set baud rates/set display speed etc.
FILE COMMANDS -- Load, Save, Verify.
ARITHMETIC COMMANDS -- Add, Subtract.
DEBUGGING COMMANDS -- Trace (or single step), Set break point, Examine and
alter registers, Mini-Disassembler.
DUMB TERMINAL COMMANDS -- Full duplex terminal, Half duplex terminal.
SYSTEMS COMMAND -- Return to BASIC
Produced by Byte Ware Pty Ltd and intended for the early ROM based Microbee. Unfortunately the Microbee that accompanied this manual did not contain this rom, so can anyone help with this ?
So in the MbeeTech Repository in the Microbee\Documentation\Manuals\Software folder we placed
beemon_instruction_manual.pdf