![]() |
|
128k SBC Disk System - Add Gotek - Printable Version +- Discussion Forum for all things Microbee (https://microbeetechnology.com.au/forum) +-- Forum: Microbee Forum (https://microbeetechnology.com.au/forum/forum-1.html) +--- Forum: Microbee Hardware (https://microbeetechnology.com.au/forum/forum-6.html) +--- Thread: 128k SBC Disk System - Add Gotek (/thread-993.html) Pages:
1
2
|
RE: 128k SBC Disk System - Add Gotek - ChickenMan - 23-03-2026 The PB system works with the Compact Flash systems, I doubt it would using the HD system Microbee introduced using the HD18 rom. RE: 128k SBC Disk System - Add Gotek - shane.crozier - 25-03-2026 Today I started looking for connectors for the Floppy interface - I can find the 34 way ribbon cable and connectors suited to a 3.5" or Gotek drive - but not edge connector style crimp-on .... any clues where I might be able to get these? Are there any pictures of the inside of the SBC01 drive enclosure here that I can have a look at ? My sister has not been sucessful finding the 128k SBC in my folks shed yet so I'm considering purchasing a 128k SBC and disk system enclosure (or making one) RE: 128k SBC Disk System - Add Gotek - CheshireNoir - 26-03-2026 I am fairly sure I picked my last batch off AliExpress. https://www.aliexpress.com/item/1005003041939020.html These, from memory. They don't have the "security notch" in them, but that can be fixed with a little bit of plastic of the suitable width. Hope that helps! John RE: 128k SBC Disk System - Add Gotek - shane.crozier - 26-03-2026 (Yesterday, 01:41 PM)CheshireNoir Wrote: I am fairly sure I picked my last batch off AliExpress. Cheers John - I've ordered a set of them - the 'security' notch isn't something I ever really worried about - a sharpie arrow for the notch on the ribbon is usually sufficient - even if you muck it up the drives arent damaged (but the really obvious light on is a giveaway) |